This is a research-based comparison. We have not physically tested these units. Prices and availability were checked on 17 November 2026 and can change. Outbound links currently earn us no commission; if that changes, the link will be labelled.
A portable power station is a battery, an inverter, and a charge controller in one box. The category has matured enough that the useful comparison is no longer “who has the biggest capacity?” It is “which combination of usable energy, continuous output, recharge speed, and service life fits the way I will actually use it?”
We shortlisted three stations that represent different points on the size-and-price curve: a compact 288Wh unit, a 1,024Wh all-rounder, and a 1,152Wh value option. All three use lithium iron phosphate (LFP) chemistry, which is the right baseline for a product you expect to keep for years.
Two warnings before the picks. First, watt-hours are not runtime; inverter losses and appliance duty cycles matter. Second, a power station is not a substitute for a licensed home backup system. If you need to run medical equipment or whole-home circuits, talk to a qualified electrician.
Selection criteria
How we picked
Usable capacity and honest runtime
We start with watt-hours, then apply a realistic depth-of-discharge and inverter-efficiency buffer. A 1,000Wh station is not a 1,000Wh appliance-hour. We favour units that publish clear runtime examples and operating limits.
Continuous output, not just peak
Continuous output determines which appliances run safely. Peak or “lifting” ratings are useful for motor startup, but they are not a licence to run a 2,000W load continuously from a 1,200W inverter.
Battery chemistry and cycle life
LFP is the default recommendation for this category: better thermal stability and longer cycle life than many older NMC packs. We look for a cycle rating with a stated end-of-life capacity, not just a marketing number.
Recharge speed and solar input
A station you cannot recharge quickly is a paperweight in a multi-day outage. We weight AC recharge time and solar input range, and we check whether the solar input is usable with commonly available panels.
Ports, weight, and warranty
USB-C PD, a 12V car socket, and enough AC outlets matter. So do weight and warranty. A 16kg unit is portable in the car, not up four flights of stairs.
Comparison
Compare at a glance
| Spec | Anker SOLIX C300 | Anker SOLIX C1000 Gen 2 | BLUETTI AC180 |
|---|---|---|---|
| Capacity | 288Wh | 1,024Wh | 1,152Wh |
| Continuous AC output | 300W | 2,000W | 1,800W |
| Peak / lifting | 600W SurgePad | 3,000W peak | 2,700W lifting |
| Battery | LFP | LFP, 4,000 cycles | LiFePO4, 3,500+ cycles |
| AC recharge | 80% in ~50 min | 100% in ~49 min | 0–80% in ~45 min |
| Max solar input | 100W | 600W | 500W |
| Ports | 7 | 9 | 11 |
| Weight | Not listed in our check | 11.3kg / 24.9lb | 16kg / 35.3lb |
| Price at check | €209.99 (EU) | €499.99 (EU) | US$549 |
| Warranty | 5 years | Check with Anker | 5 years |
Specifications from manufacturer pages retrieved 17 November 2026. Prices are not normalised across currencies or regions. Read the full product records for source links.
The picks
Our recommendations
Anker SOLIX C1000 Gen 2
The C1000 Gen 2 has the most useful balance of capacity, output, and recharge speed. At 1,024Wh and 2,000W continuous, it can run a fridge, router, lights, and a laptop during a short outage without being immovable. The 49-minute AC recharge is the feature that makes it practical between storms.
Best for: A first home-backup station, van life, and job sites with 1–2kW loads.
Anker SOLIX C300
The C300 is the one you can actually carry with one hand and store in a closet. It will not run a fridge, but it will keep a router, laptop, phone, and a few lights alive for hours — and its 140W USB-C port makes it useful even when the power is on.
Best for: Apartment outages, camping, and a personal electronics kit.
BLUETTI AC180
The AC180 offers 1,152Wh, 1,800W continuous output, and a five-year warranty at US$549. It is heavier than the C1000 Gen 2 and was out of stock at check, but the capacity-per-dollar case is strong if you can wait for restock.
Best for: Value-focused buyers with a vehicle or a garage to store it.
How to size a station without guessing
Write down the devices you want to run and their wattage. Then estimate how many hours per day you need each one. Multiply watts by hours to get watt-hours, add the devices together, and divide by 0.8 to account for inverter losses and a safety buffer. That is your minimum usable capacity.
Example: a 60W fridge compressor that runs 30% of the time uses about 432Wh per day. A 10W router uses 240Wh per day. A 60W laptop charged for four hours uses 240Wh. Add a few lights and phones, and a 1,024Wh station covers roughly a day of essentials — not a week.
If you need multiple days, capacity alone is not the answer. You need recharge: solar, a generator, or a vehicle. A larger battery with a slow solar input can be less useful than a smaller battery that refills quickly.
What a 1kWh station can and cannot run
It can typically run a modern fridge for several hours, a CPAP for one to two nights, a router and laptop for a day, and LED lights for a long time. It can run a microwave or coffee maker briefly, but those loads drain capacity fast.
It cannot run a central air conditioner, an electric water heater, a whole-home furnace, or an EV charger. Those loads require installed backup power, not a portable battery. Be sceptical of any marketing that implies otherwise.
Why we did not include every popular brand
We limited this guide to units whose manufacturer specifications and prices we could verify at the time of publication. That excludes several popular models whose pages were unavailable, region-locked, or missing key ratings during our check.
We also excluded units without LFP chemistry, units with unclear continuous-output ratings, and units whose warranty terms were not published. Those are not automatic disqualifiers, but they make a research-based recommendation harder to defend.
Safety and certification
Look for recognised safety certification and a clear operating-temperature range. Do not charge a power station in a sealed closet, and do not store it in a car in direct summer sun. If you plan to use a station for medical equipment, confirm the device's surge requirements and have a backup plan.
Solar panels add their own risks: incorrect polarity, over-voltage, and damaged cables. Use panels within the station's published voltage and current limits, and prefer connectors that lock.
Questions
Frequently asked
How many watt-hours do I need for a power outage?
For phones, a router, a laptop, and a few lights, 300–500Wh is often enough for a day. For a fridge and a CPAP, plan on 1,000–1,500Wh. Add capacity for multi-day outages, and plan how you will recharge.
Can a portable power station run a refrigerator?
Yes, if the station's continuous output exceeds the fridge's running wattage and its surge rating covers startup. A 1kWh station will run a typical fridge for several hours, not days.
Is LFP better than NMC?
For most buyers, LFP is the better default: longer cycle life and better thermal stability. NMC packs can be lighter for the same energy, which matters in some portable designs.
Can I charge with solar panels I already own?
Only if the panel voltage and current fall within the station's solar input range. Check the connector type and the maximum input voltage before connecting.
Did you test these units?
No. This is a research-based comparison using manufacturer specifications and published prices. We say so on every page and link the source for each fact.
Evidence
Sources
-
€209.99 at retrieval. EU store; US pricing and availability differ.
-
€499.99 at retrieval. EU store; US pricing and availability differ.
-
US$549 at retrieval; listed as out of stock with a late-November restock estimate.
-
Weekly relative search-interest index, 0–100. Not search volume.
-
Weekly relative search-interest index, 0–100. Not search volume.